Line Installation Tips from Wally
A few tips for installing the two line front kit, from none other than Wallace "Wally" Shults, a man who has put his share of Galfer line kits on Concours:
"Mostly it's straightforward, but if you start at the top instead of at the caliper you will be cursing up a storm when you get down there." :-)
"The left hose is the same at both ends, but the right hose is not. The banjo fitting is straight at the top and bent at the bottom for the right side."
"If you put either top ones on first, you still might not get the bottom on if the hose needs to be rotated 180 degrees. So, the best way is to attach it at the caliper first and then run it up."
"I attached a couple of pix."
Wally